Table of Contents
Advertisement
Quick Links
Chapter
Getting Acquainted
1
Read this first!
•
Be sure to read this part of the User's Guide before doing anything
else! It includes important information that you need to know in order
to use the PV-200A/PV-250X/PV-400A/PV-450X (hereinafter referred
to as the "PV Unit") correctly.
•
You can find more detailed information about other PV Unit operations
in "Chapter 12 - General Operations" on page 147 and "Chapter 14 -
Technical Reference" on page 175.
Important!
Please keep this User's Guide and all information handy for future reference.
Make backup copies of important data! ....................................... 10
Important Precautions.................................................................... 10
Data Errors ...................................................................................... 11
To reset after viewing data .......................................................................... 12
General Guide ................................................................................. 13
Power Supply ................................................................................... 14
Low Battery Warning .................................................................................. 14
Battery Precautions ..................................................................................... 14
To replace the batteries ............................................................................... 16
To turn power on and off ............................................................................ 19
Auto Power Off ........................................................................................... 19
Using the Backlight ......................................................................... 19
Action Control and Stylus .............................................................. 19
Stylus .......................................................................................................... 20
Action Control ............................................................................................ 20
Using the Icon Menu ....................................................................... 21
Modes ............................................................................................... 22
To enter a mode using the icon menu ......................................................... 22
To enter a mode using the on-screen icon menu ......................................... 22
To enter a mode using the Mode List ......................................................... 23
1
9
Advertisement
Table of Contents
Related Manuals for Casio PV-250X
Summary of Contents for Casio PV-250X
-
Page 1: Table Of Contents
Chapter Getting Acquainted Read this first! • Be sure to read this part of the User’s Guide before doing anything else! It includes important information that you need to know in order to use the PV-200A/PV-250X/PV-400A/PV-450X (hereinafter referred to as the “PV Unit”) correctly. •... -
Page 2: Make Backup Copies Of Important Data
• The contents of this manual are subject to change without notice. • CASIO COMPUTER CO., LTD. assumes no responsibility for any loss or claims by third parties that may arise from the use of this product. -
Page 3: Data Errors
Before doing so, you may want to recall important data and write it down (if you don’t yet have a copy). You can then re-input the data after clearing PV Unit memory. Continued problems after performing the RESET operation can indicate a serious hardware problem. Consult with your nearest CASIO dealer if problems persist. -
Page 4: To Reset After Viewing Data
To reset after viewing data 1. After the Data error message appears, tap Yes. 2. In response to the message that appears (Data error! Consult your User’s Guide for correct procedure.), tap OK. • This displays the pop up tool screen. 3. -
Page 5: General Guide
Chapter 1 Getting Acquainted General Guide Action control Stylus Touch screen Cradle contacts RESET button Battery switch P button Battery compartment cover... -
Page 6: Power Supply
Power Supply Your PV Unit can be powered by two AAA-size alkaline batteries. Important! • Normally the flash memory of the PV Unit retains its data even when power is turned off and when batteries go dead. Mis-operation or other problems, however, can cause data to become corrupted or lost. - Page 7 Chapter 1 Getting Acquainted • Never mix old batteries and new ones. • Do not expose batteries to direct heat, let them become shorted, or try to take them apart. • Never leave dead batteries in the battery compartment. • Remove the batteries if you do not plan to use the PV Unit for a long time.
-
Page 8: To Replace The Batteries
To replace the batteries Important! • Always make sure the battery switch is in the NORMAL OPERATION position at all times, except when replacing batteries. 1. Turn off PV Unit power. 2. Slide the battery switch on the back of the PV Unit to the REPLACE BATTERIES position. - Page 9 Chapter 1 Getting Acquainted 4. Remove both of the old batteries. 5. Load two new batteries, making sure that their positive (+) and negative (–) ends are facing in the proper directions. REPLACE BATTERIES NORMAL OPERATION 6. Taking care not to damage its tabs, replace the battery compartment cover back onto the PV Unit.
- Page 10 8. Open the cover. • If the above does not appear on the display, remove the batteries and then reload them into the PV Unit, making sure you follow proper procedures. If this does not solve the problem, refer to “Troubleshooting” on page 192.
-
Page 11: To Turn Power On And Off
Chapter 1 Getting Acquainted To turn power on and off 1. Touch anywhere on the PV Unit screen or press the Action control to turn on power. 2. To turn power off, tap Off with the stylus. Auto Power Off The Auto Power Off function automatically turns off power whenever you do not perform any operation for a specified period. -
Page 12: Stylus
Stylus The stylus takes the place of a computer mouse. You can perform all PV Unit operations with the stylus. In this manual, all data input operations are described using stylus operations. You can perform the following basic operations with the stylus. •... -
Page 13: Using The Icon Menu
Chapter 1 Getting Acquainted Using the Icon Menu The PV Unit has an icon menu beneath its display screen. You can tap these icons to perform various functions no matter what mode you are using. Icon Description Turns off PV Unit power. Menu Displays the Mode Menu. -
Page 14: Modes
Modes With most PV Unit operations, you must first enter a mode before you can input or view data. You can use any of the following methods to enter a mode. • Tap an icon in the icon menu beneath the display screen •... -
Page 15: To Enter A Mode Using The Mode List
Chapter 1 Getting Acquainted To enter a mode using the Mode List 1. Press the Action control to turn on PV Unit power and display the Mode List. Scroll bar 2. If the mode you want is not on the screen, scroll the menu up and down. •...