Casio FX-9860G MANAGER PLUS User Manual page 46

Message
A problem occurred while
reading file <file name>.
The disk being read from may
be damaged or may not exist.
Check the disk and try again.
A problem occurred while
writing file <file name>.
The disk being written to may
be damaged or may not exist.
Check the disk and try again.
A problem occurred while
reading file <file name>.
The file may have been moved
or deleted.
There is not enough memory.
Increase memory capacity and
try again.
A problem occurred while
launching the emulator.
Try re-starting the application.
If you still cannot launch, it
could mean that the emulator
is damaged. Update the
emulator or reinstall it.
A problem occurred while
launching the manual (***.pdf)
viewer.
Download the viewer from the
site below and reinstall it.
http://www.adobe.com/
products/acrobat/readstep2_
allversions.html
The following characters
cannot be used in a Key-Log
record name.
:\ /?*[]
A system error has occurred.
Exit the emulator and restart it.
If this does not correct the
problem, it could mean that the
emulator file is damage.
Reinstall the emulator.
Description
A problem occurred while
reading from a disk.
A problem occurred while
writing to a disk.
A problem occurred when you
tried opening a file from the list
of previously opened files on
the File menu.
There is not enough memory
to perform the operation.
A problem occurred during
emulator startup.
A problem occurred during
manual viewer startup.
The Key-Log record name you
are trying to use contains an
illegal character.
—
E-44
Required Action
Check the disk for data
corruption and confirm that the
disk exists. Then try again.
Check the disk for data
corruption and confirm that the
disk exists. Then try again.
Check to see if the file has
been moved or deleted.
Increase memory capacity and
try again.
Try restarting the application.
If this does not work, it could
mean that the emulator is
damaged. Update the emulator
or reinstall it.
Download and install a new
viewer from
http://www.adobe.com/
products/acrobat/readstep2_
allversions.html.
The following characters are
not allowed in Key-Log record
names.
:\ /?*[]
Follow the steps that are
shown on the display and try
again.