Using Screen Receiver To Display The Calculator Screen Image On Your Computer - Casio FX-9860G MANAGER PLUS User Manual

10. Using Screen Receiver to Display the
Calculator Screen Image on
Your Computer
This section explains how to connect an fx-9860G calculator to a computer and display the
calculator screen image on the computer.
Important!
• Check to make sure that the operating system version of the fx-9860G calculator is 1.02 or
greater. If it isn't, you will need to update your operating system. For details, see the information
about updating the operating in the readme.txt file on the fx-9860G Manager PLUS CD-ROM.
• A USB driver install dialog box will appear the first time you connect the fx-9860G calculator to
your computer with the USB cable. Follow the instructions that appear on the dialog box. Screen
Receiver will not operate properly if you cancel the install operation.
k Configuring fx-9860G Communication Settings
Before you can connect the calculator to your computer, you first need to perform the following
procedure and configure the calculator's communication settings.
To configure the fx-9860G calculator communication settings
1 .
From the Main Menu, enter the LINK mode.
2 .
Press $(CABL).
• This displays the Select Cable Type screen.
3 .
Press !(USB).
4 .
Press &(CAPT).
• This displays the Capture Set Mode screen.
5 .
Press #(OHP).
• This displays the screen shown nearby, which indicates
that the setup procedure is complete.
E-39