Getting started
5. Replace the convertible base mount by aligning the small tabs to
the slots in the middle of the telephone base and the larger tabs in
the slots near the top as shown.
6. Turn the set over and place the handset on the cradle. Plug one end
of the telephone line cord into the jack on the back of the telephone
base and the other end into a modular jack.
7. Plug the smaller end of the power adapter into the jack on the back
of the telephone base and the larger end into an electrical outlet
not controlled by a wall switch.
Route the cord through
the tabbed slot.
WALL
WALL
DESK
THIS END UP
FOR WALL USE
4
WALL
WALL
DESK
USE
DESK
FOR
UP
END
THIS
DSL filter (not included) is
required if you have DSL
high speed Internet service.