Toring Vip Melody; Changing A Stored Vip Melody Record - GE 21098GE3 User Manual

Storing VIP Melody
1. Make sure the phone is OFF (not in talk mode).
2. Press the mute/prog button once to display the submenus; ROOM
MONITOR and HANDSET SETUP.
3. Press the  or  buttons to scroll to the HANDSET SETUP.
4. Press the mute/prog button to enter into this HANDSET SETUP.
5. Press the  or  buttons to scroll to VIP MELODY submenu.
6. Press the mute/prog button to select VIP melody feature and then display
VIP 1 record.
NOTE: If VIP1 does NOT contain any specific number/records, it will display
"EMPTY."
7. Press the cid/vol  or  buttons to select the specific VIP melody
memory location (10 VIP locations) that does not contain any record.
8. Press the mute/prog button to display SELECT MEMORY.
NOTE: If the memory location does not contain any CID memory records
and you are trying to mark a specific record as VIP MELODY, then "SELECT
MEMORY" will not be displayed. Instead, "NO USER MEMORY" will display in
prompt to alert the user.
9. Press the cid/vol  or  buttons to view the records from memory to be
selected as VIP.
10. Press the mute/prog button to confirm and then VIP MELODY 01
displays.
11.Press the cid/vol  or  buttons to select from melody 01 to melody 10
(a testing tone is generated while making melody selection)
12. Press the mute/prog button to confirm.
NOTE: If the desired number/record was previously stored in any one of the
ten VIP melody records, "DUPLICATE NUMBER" shows on the display.

Changing a Stored VIP Melody Record

Use the Storing VIP Melody procedure to change the number of a selected
record and replace the old phone number with new phone number.
62