Important Safety Information; Precautions To Avoid Possible Exposure; To Excessive Microwave Energy - Danby DMW758BL Owner's Manual

Danby microwave oven owners manual
Hide thumbs Also See for DMW758BL:
Table of Contents

Advertisement

Entretien et nettoyage
Trucs pratiques
Ouvrez la porte pendant
quelques minutes après la
cuisson afin d'aérer l'intérieur.
Un frottage occasionnel à l'eau
et au bicarbonate de soude
permet de garder l'intérieur
frais.
Parois, plancher, fenêtre
Nettoyage de
intérieure, pièces métalliques
l'intérieur
et de plastique sur la porte
Certaines éclaboussures
peuvent être éliminées à l'aide
d'un essuie-tout, tandis que
d'autres nécessitent un linge
humide. Éliminez les éclabous-
sures de graisse à l'aide d'un
linge savonneux et rincez à l'aide
d'un linge humide. N'utilisez pas
de produit nettoyant abrasif ni
d'ustensile coupant sur les
parois du four. N'utilisez jamais de
nettoyant à four commercial sur
Nettoyage de
Boîtier extérieur
l'extérieur
Nettoyez l'extérieur du four à
micro-ondes à l'aide d'un linge
savonneux. Rincez et laissez
sécher. Essuyez la fenêtre à
N'utilisez pas de produit
l'aide d'un linge humide.
nettoyant à l'ammoniaque
ou à l'alcool dans le four.
Panneau de
L'ammoniaque et l'alcool
peuvent endommager
commande et porte
l'apparence de votre four à
Essuyez à l'aide d'un linge
micro-ondes.
humide. Bien rincer. N'utilisez
pas de nettoyant vaporisateur,
une trop grande quantité de
savon et d'eau ni d'objet
coupant sur le panneau : cela
pourrait l'endommager.
Certains type d'essuie-tout
peuvent aussi égratigner le
panneau de commande.
50
REMARQUE :
Assurez-vous que le
four est éteint avant
d'en nettoyer toute
partie.
quelque partie de votre four à
micro-ondes.
Anneau et plateau tournants
amovibles
Afin d'éviter tout bris, ne placez pas
le plateau dans l'eau
immédiatement après la cuisson.
Lavez-le avec soin dans de l'eau
savonneuse tiède, ou au lave-vais-
selle. Le plateau tournant et l'anneau
peuvent se briser s'ils sont
échappés. Rappelez vous de ne pas
utiliser le four sans son plateau et
son anneau tournants.
Surface de la porte
Il est important que les
endroits où la porte se ferme
hermétiquement contre le four
à micro-ondes soient toujours
propres. N'utilisez que des
produits nettoyants doux et
non abrasifs, appliqués à l'aide
d'une éponge propre ou un
linge humide. Bien rincer.

IMPORTANT SAFETY INFORMATION

READ ALL SAFETY INFORMATION BEFORE USING
FOR YOUR SAFETY
PRECAUTIONS
For your safety the information in this manual must be followed to
minimize the risk of fire or explosion or to prevent property damage,
personal injury or loss of life.
TO AVOID
Do Not Attempt to operate this oven with the door open since
open-door operation can result in harmful exposure to microwave
POSSIBLE
energy. It is important not to defeat or tamper with the safety
interlocks.
EXPOSURE
Do Not Place any object between the oven front face and the door or
allow soil or cleaner residue to accumulate on sealing surfaces.
TO EXCESSIVE
Do Not Operate the oven if it is damaged. It is particularly important
that the oven door close properly and that there is no damage to the:
MICROWAVE
1 door (bent),
ENERGY
2 hinges and latches (broken or loosened),
3 door seals and sealing surfaces.
The Oven Should Not be adjusted or repaired by anyone except
properly qualified service personnel.
FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT
(U.S.A. ONLY)
This equipment generates and uses ISM frequencies and if not installed and used properly, that is in
strict accordance with the manufacturer's instructions, may cause interference to radio and television
reception. It has been type-tested and found to comply with limits for ISM Equipment pursuant to Part 18
of FCC Rules, which are designed to provide reasonable protection against such interference in a
residential installation.
However, there is no guarantee that interference will not occur in particular installations. If this
equipment does cause interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following:
• Reorient the receiving antenna of radio or television.
• Relocate the microwave oven with respect to the receiver.
• Move the microwave oven away from the receiver.
• Plug the microwave into a different outlet so that microwave and receiver are on different
branch circuits.
The Manufacturer is not responsible for any radio or TV interference caused by UNAUTHORIZED
MODIFICATION to this microwave oven. It is the responsibility of the user to correct such interference.
SAVE THESE INSTRUCTIONS
3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dmw758bwDmw758w

Table of Contents

Save PDF