Getting Started With The Configuration - Cisco SLM248P Quick Start Manual

Connect the switch to network devices according to the the
S 5
TEP
installation instructions in section 4, "Connecting the Equipment".
3
Getting Started with the
Configuration
Before you begin to use the Configuration Utility, make sure that you have a
computer that meets the following requirements:
• Internet Explorer (version 6 or higher) or Firefox (version 3 or higher).
• The Web-based configuration utility is optimized for a screen resolution
of 1024 x 768.
To get started configuring your switch, perform the following:
Connect a computer to an available LAN port.
S 1
TEP
Start a web browser.
S 2
TEP
In the address bar, enter the default IP address of the switch,
S 3
TEP
http://192. 1 68. 1 .254 and press Enter.
6 Cisco Small Business SLM Series Smart Switch Installation Guide