Console Port And Auxiliary Port Connection Considerations; Console Port Connections; Auxiliary Port Connections; Figure 2-4 Slot Filler Panel - Cisco EF4116 Hardware Installation And Maintenance Manual

Figure 2-4
Alignment
groove

Console Port and Auxiliary Port Connection Considerations

The following sections describe the console port and auxiliary port found on all Cisco 4000 series
routers.

Console Port Connections

Each router includes an asynchronous router console port (female DB-25 connector) wired as a data
communications equipment (DCE) device. The default parameters for this port follow:
•
•
•
•
In the appendix "Cabling Specifications," Table A-1 lists the pinout for the Cisco 4000-M console
port and Table A-2 lists the pinout for the Cisco 4500-M and Cisco 4700 console port.

Auxiliary Port Connections

A male DB-25 connector auxiliary port (labeled AUX on the chassis rear) is included on all router
units. The AUX port is a shared-memory data terminal equipment (DTE) port to which you can
attach an EIA/TIA-232 connector from a channel service unit/data service unit (CSU/DSU), a
modem, or protocol analyzer for network access. In the appendix "Cabling Specifications,"
Table A-1 lists the pinout for the Cisco 4000-M and Table A-2 lists the pinout for the Cisco 4500-M
and Cisco 4700 asynchronous serial auxiliary port.
Slot Filler Panel
Available Slot
screw locations
9600 baud
8 data bits
No parity generated or checked
2 stop bits
Console Port and Auxiliary Port Connection Considerations
Mounting
Alignment
groove
Preparing for Installation 2-9