Cisco CISCO871-K9 - 871 Integrated Services Router Hardware Installation Manual page 67

Chapter 4 Router Cabling Procedures
Figure 4-19
LEFT
1 Router
2 Ethernet cables on the PoE module
3 PoE module
4
PoE module power adapter
Perform the following steps to connect power to the router and to the PoE module:
Connect one end of the power supply cable to the input jack of the router.
Step 1
Connect the other end of the power supply cable to the router power adapter.
Step 2
If a PoE module is connected to the router, connect the PoE module power adapter to the PoE module.
Step 3
Plug the power cord of the router power adapter into an electrical outlet. If a PoE module is connected
Step 4
to the router, plug the power cord for the PoE module into an electrical outlet.
OL-5331-01
Connecting AC Adapters to the Router and to the PoE Module
1
Cisco 871W
SN: XXXNNNNXXXX
WAN
LAN
1
0
FE0 FE1 FE2 FE3 FE4
2
PWR
0 1 2 3
To LAN
3
4
Cisco 850 Series and Cisco 870 Series Access Routers Hardware Installation Guide
CONSOLE
RESET
RIGHT / PRIMARY
+5,+12 VDC
AUX
5
5 Router power adapter
6 PoE module power adapter plug
7 Router power adapter plug
Connecting the AC Adapter
7
6
4-23