Cisco 2651 User Manual page 23

Table 14
LED
ACT
SYS PS1
and
SYS PS2
-48V PS1
and
-48V PS2
All of these physical interfaces are separated into the logical interfaces from FIPS 140-2 as described in
Table
Table 15
Router Physical Interface
10/100BASE-TX LAN Port
WIC Interface
Network Module Interface
Console Port
Auxiliary Port
Compact Flash slot
10/100BASE-TX LAN Port
WIC Interface
Network Module Interface
Console Port
Auxiliary Port
Compact Flash slot
10/100BASE-TX LAN Port
WIC Interface
Network Module Interface
Power Switch
Console Port
Auxiliary Port
Cisco 1721, 1760, 2621XM, 2651XM, 2691, 3725, and 3745 Modular Access Routers and 7206-VXR NPE-400 Router FIPS 140-2 Non-Proprietary
OL-6083-01
The Cisco 1721, 1760, 2621XM, 2651XM, 2691, 3725, 3745, and 7206 VXR NPE-400 Routers
Cisco 3745 Front Panel LEDs and Descriptions (Continued)
Indication
Solid or blinking green
Off
Solid green
Amber
Off
Solid green
Amber
Off
15:
Cisco 3725 and Cisco 3745 FIPS 140-2 Logical Interfaces
Description
System is receiving interrupts, or is actively transferring
packets
No interrupts or packet transfers are occurring
Power supply installed and operating normally
Power supply installed and powered off, or fault condition
occurred
Power supply not present, or failed
-48V power module installed and operating normally
-48V power module installed and powered off, or fault
condition occurred
-48V power module not present, or failed
FIPS 140-2 Logical Interface
Data Input Interface
Data Output Interface
Control Input Interface
23