Product Overview Features The 500Mbps Compact Powerline AV Adapter, model TPL-406E, uses any electrical outlet to create a secure building-wide high speed network. Two adapters are needed to start a network. Connect one adapter to your router and plug another adapter into any outlet on your electrical system for instant high speed network access.
3. Once the Powerline adapter is installed and connected to your router, verify that the Power (PWR) LED is on or blinking and the Ethernet Connection (ETH) LED is on or Note: The TPL-406E package only includes a single Powerline adapter. Please blinking.
Change your default encryption key using the Sync button Powerline networks consist of two or more Powerline devices connected together using the same encryption key. TRENDnet Powerline adapters automatically connect to each other over a secure encrypted signal and share the same encryption key (Default The physical Sync button on the Powerline adapter provides an easy method of encryption key: HomePlugAV).
To change the default encryption key between two Powerline adapters: Add adapters using the Sync button Note: Use the Sync button procedure below if you are connecting TRENDnet Powerline If you have changed the default encryption key assigned to your Powerline adapters, models TPL-303E, TPL-304E, TPL-308E, TPL-309E, TPL-311P, TPL-406E, or TPL-407E.
Powerline network: The Powerline Utility allows you to do the following: Note: Use the Sync button procedure below if you are connecting TRENDnet Powerline • Create a customized encryption key for your Powerline network and apply it to models TPL-303E, TPL-304E, TPL-308E, TPL-309E, TPL-311P, TPL-406E, or TPL-407E.
If you are using an older firmware version on your Powerline adapter, it is 3. Within 2 minutes, push and hold the Sync button on the TPL-406E for 3 seconds and recommended for you upgrade to the latest firmware version to ensure the latest fixes release it.
Page 26
TPL-306E Powerline adapters by using the Sync button. Either of the TPL-306E can be replaced with any of the models in the table and the TPL-406E can be replaced with Note: It is recommended that only a maximum of up to 4 Powerline networks can be the TPL-303E, TPL-304E, TPL-311P, or TPL-407E when following this procedure.
Page 28
TPL-406E / TPL-406E2K TRENDnet User’s Guide noteikumiem. Česky TRENDnet tímto prohlašuje, že tento TPL-406E je ve shodě se Lietuvių Šiuo TRENDnet deklaruoja, kad šis TPL-406E atitinka esminius [Czech] základními požadavky a dalšími příslušnými ustanoveními [Lithuanian] reikalavimus ir kitas 2004/108/EB Direktyvos nuostatas.
Page 29
Download section limited to, duty, tax, and other fees. and look for the desired TRENDnet product to access to the GPL Code or LGPL Code. These codes are distributed WITHOUT WARRANTY and are subject to the copyrights of WARRANTIES EXCLUSIVE: IF THE TRENDNET PRODUCT DOES NOT OPERATE AS the developers.