Care And Maintenance; Air Filter Removal; Cleaning Air Filter; End-Of-Season Care - Danby dac10007ee Use And Care Manual

Care and Maintenance

When cleaning the air conditioner, be sure to
turn the POWER OFF and disconnect the power
cord from the electrical outlet.
1. DO NOT use gasoline, benzine, thinner or other
chemicals on the air conditioner as these
substances may cause damage to the paint finish
and deformation of plastic parts.
2. Never attempt to pour water directly on unit as
this will cause deterioration of the electrical
insulation.

Air Filter Removal:

The air filter is located behind the air intake front
grill. To remove the air filter, grasp the sides of the
front grill and pull forward to open and access the
filter.
To reinstall the air filter, reverse the above
procedures. The air filter may be vacuumed or
washed by-hand in warm water. Dry thoroughly
before installing.

Cleaning Air Filter

1. Use a vacuum cleaner with soft brush
attachment.
2. Wash the filter in lukewarm water below 40°C
(104°F): To get better results, wash with soapy
water or a neutral cleaning agent.
3. Rinse the filter with clean water and
dry thoroughly before re-installing.
IMPORTANT
DO NOT forget to install the air filter. If the air
conditioner is left to operate without the air filter,
dust is not removed from the room air and may
result in machine failure.
When the air inlet grill and cabinet are dirty, wipe
with lukewarm water (below 40°C / 104°F). Use of
a mild detergent is recommended.

End-of-Season Care

1. Operate the fan alone for half a day to dry out the
inside of the unit.
2. Turn off power and remove plug from wall socket.
3. Clean filter.
4. Store (covered) air conditioner in a dry location.
CAUTION
When installing and/or removing the air
conditionner from the window, ensure that
caution is taken to prevent the unit from falling
backward. It is recommended that installtion
or removal of the airconditioner is done with
assitance to prevent injury to persons or
damage to the unit or property.
9