KVM switch. Your installation is now complete. Register Your Product To ensure the highest level of customer service and support, please take a moment to www.trendnet.com/register register your product Online at: Thank you for choosing TRENDnet.
3. Operation Note: To switch between computers, you can use the front-panel push buttons or the Hot Key commands. LED Indicators Red LED light: KVM cable is connected and PC is powering the KVM switch. Green LED light: Indicates the selected PC port is active, whether the computer is turned on or off.
Page 8
KVM switch is in "Hot Key" mode. If you do not press a key within 2 seconds, the switch will exit hot key mode. To select a specific PC port: For TK-401R Scroll Lock Scroll Lock + Y = Port number 1-4...
Page 9
Quick Reference Sheet for TK-401R/801R/1601R Front-Panel Hot Keys Description Command Buttons TK-401R Scroll Lock Scroll Lock + Press the Push Button (Y)= 1-digit port number (1-4) Select the active for a specific port to Select PC PC channel TK-801R/TK-1601R switch to that port...
PS/2 Interface Power Power External AC Power Adapter : 9V DC, 1A (TK-801/TK1601 only) TK-401R: 202 x 104 x 45mm (8.0 x 4.1 x 1.8 in.) TK-801R: 407 x 165 x 45mm (16.0 x 6.5 x 1.8in.) Dimensions TK-1601R: 406 x 165 x 85 mm (16.0 x 6.5 x 3.4 in.) TK-401R: 835g (1.84lb.)
You can switch computers by pressing the Push Buttons on the KVM switch or using the Hot Key commands.. Go to Section 3 Operation for more information. If you still encounter problems or have any questions regarding the TK-401R/TK-801R/TK-1601R, please contact Trendnet's Technical Support Department.
Page 12
TRENDnet products. Products that are sent to TRENDnet for RMA service must have the RMA number marked on the outside of return packages and sent to TRENDnet prepaid, insured and packaged appropriately for safe shipment.
Page 13
Download section and look for the desired TRENDnet product to access to the GPL Code or LGPL Code. These codes are distributed WITHOUT WARRANTY and are subject to the copyrights of the developers. TRENDnet does not provide technical support for these codes. Please go to http://www.gnu.org/licenses/gpl.txt...
Page 14
Certifications This equipment has been tested and found to comply with FCC and CE Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received. Including interference that may cause undesired operation.