2. How to install the surge arrestor
1. Before installing the antenna, make
sure the low loss outdoor cable
(TEW-L406/TEW-L412) can reach the
location of your access point or router.
Attach the enclosed cable adapter's
blue sleeve to the Wi-Fi device
(Reverse SMA) and the cable adapters
black sleeve (N-type) to the surge
arrestor.
2. Take out the L-type metal bracket and
mark the mount position on the wall.
3. Screw it to the wall.
4. Seat the arrestor into bracket.
4
English
Put on the washer.
Screw on the nut.