Table of Contents
Advertisement
Self Pin Code: This is the WPS PIN code of the wireless router. You may need this information
when connecting to other WPS-enabled wireless devices.
SSID: This is the network broadcast name (SSID) of the router.
Authentication Mode: It shows the active authentication mode for the wireless connection.
Passphrase Key: It shows the passphrase key that is randomly generated by the wireless
router during the WPS process. You may need this information when using a device which
doesn't support WPS.
Interface: If device is set to repeater mode, you can choose "Client" interface to connect with
other AP by using WPS, otherwise you may choose "AP" interface to do WPS with other
clients.
WPS via Push Button: Press the button to start the WPS process. The router will wait for the
WPS request from the wireless devices within 2 minutes.
WPS via PIN: You can fill-in the PIN code of the wireless device and press the button to start
the WPS process. The router will wait for the WPS request from the wireless device within 2
minutes.
Client List
This WLAN Client Table shows the Wireless client associate to this Wireless Router.
TOOLS
Password
You can change the password required to log into the broadband AP's system web-based
management. By default, the password is: admin. Passwords can contain 0 to 12
alphanumeric characters, and are case sensitive.
21
Advertisement
Table of Contents
