Working With Profiles; Creating A Profile - TRENDnet TEW-601PC User Manual

The Link Information
shows at the bottom of all screens so you are always aware of your connection status. l
NOTE

Working with Profiles

A profile is a record of the configuration you use to connect to a particular access point. Without
profiles, you would have to reconfigure the TEW-601PC each time you change access points.
Using the Profile screen you can configure the TEW-601PC to access your home network and your
office network. Each configuration is saved as a profile. Then when you go from the office to your
home you just select the appropriate profile.
NOTE
C P
REATING A ROFILE
Refer to the following to add a profile.
1. Click Profile.
pane provides information on your current connection. This same pane is
W WCB-360A
HEN THE
W
SETTINGS IN THE IRELESS
BUTTONS THAT ARE NOT AVAILABLE ARE GRAYED OUT.
Y
OU CAN CHANGE PROFILES WITHOUT REBOOTING YOUR COMPUTER.
WHEN WALKING FROM ONE ACCESS POINT TO ANOTHER WITHIN YOUR OFFICE.)
W C
YOU USE INDOWS ONTROL PANEL TO CONFIGURE YOUR CONNECTIONS, YOU
MUST REBOOT THE COMPUTER WHEN CHANGING ACCESS POINTS.
IS NOT CONNECTED TO YOUR COMPUTER, MOST
C U
LIENT TILITY ARE UNAVAILABLE.
Getting Started with the
S
ETTINGS OR
(P
ERHAPS
I
F
TEW-601PC
-- 3