Denon AVR-2312CI Owner's Manual page 70

9
Use o p to set whether or not a
subwoofer channel is measured.
Measure Set for measuring a subwoofer.
Skip Set for no measuring of a
subwoofer.
10
Use o p to set whether or not a surround back
channel is measured.
Measure
Set for measuring two surround back speakers.
(2spkrs)
Measure
Set for measuring a surround back speaker.
(1spkr)
Skip
Set for no measuring of a surround back speaker.
11
o p
Use to set whether or not a front height channel
is measured.
Measure Set to measure the front height speakers.
Skip
Set when you do not want to measure the front height
speakers.
12
Press RETURN B .
Proceed to page 21 STEP1 Preparation
NOTE
After performing Audyssey ® Auto Setup, do not change the speaker
connections or subwoofer volume. In event of a change, perform
Audyssey ® Auto Setup again.
step 6.
Set up speakers
67