D-Link DNS-G120 Manual page 23

DNS-G120 User's Manual
Using the Setup Wizard (continued)
Leave DHCP Client enabled if your
network contains a DHCP server or
router. If not, select Static IP and enter
the IP address information to be used.
The IP address must be in the same
range as your network.
Click Next
Enter the workgroup name of your
network. Enter a name and a description
for the DNS-G120.
Click Next
If you have configured the wireless
settings using Windows® Connect
Now (WCN), click Next without any
configuration changes. Refer to page
11 for WCN setup instructions.
By default, the wireless function is
disabled. To connect to a wireless
network, select Enable and click on Site
Survey or you may manually enter your
wireless settings and security information
(as explained on pages 26-27).
Click Next
D-Link Systems, Inc.
Using the Configuration Utility
23