Using The Dcs-2100G With An Internet Browser - D-Link SECURICAM Network DCS-2100G User Manual

DCS-2100G User's Manual
Using the DCS-2100G with an Internet
Browser
If you are following this manual in the order it is presented, you should now have an
operating DCS-2100G Internet Camera configured with the Installer program. You also
have installed the IP surveillance software from the CD. This section of the manual will
deal with using the Internet Camera in two parts:
Using the DCS-2100G with an Internet browser and accessing the screens to
control and monitor the camera.
Using IP surveillance software with the DCS-2100G.
Open your Internet Explorer Web browser and enter the IP address for your Internet
Camera.
In the example, this address is 192.168.0.120. Your address may differ.
If a window appears asking to install a Verisign certificate for authentication
Click Yes. This allows the proprietary MPEG 4 video stream to be recognized by Internet
Explorer.
D-Link Systems, Inc.

Using the DCS-2100G with an Internet Browser

43