Table of Contents
Advertisement
Replacing the remote control battery
To replace the batteries in the remote control, the battery door
must first be removed. Push down on the battery door release
latch, see step 1, then push the door in a downward direction, see
step 2. Place the batteries into the battery compartment as
pictured below to complete the installation.
Battery Polarity
Orientation
Notes on battery
If the remote control functions better when it is closer to
the unit, the battery may need to be replaced.
In case of any leakage of the battery, dispose of the battery
right away and avoid touching the chemical discharge.
Make sure to clean the remote control's battery
compartment before installing a new battery.
GETTING STARTED
GETTING STARTED
Push in
1
Slide
2
down
-
+
-
+
Operating the remote control
When using the remote control, be sure to stay within a 30
degree angle of the sensor on the receiver. Keep in mind that
any obstructions between the remote control and the receiver
will affect performance.
6
6
30
30
Advertisement
Table of Contents
