Faqs - Creative X-Fi Xmod User Manual

Wendy UG.fm Page 12 Monday, August 28, 2006 3:09 PM

12 FAQs

FAQs
I can't hear any sound from my earphones or speakers.
Check that:
• your speaker system's power is turned on.
• Xmod is powered from your computer, or the power adapter.
• the volume is not muted. Press the Level Control to unmute.
• you have connected the earphones or speakers to Xmod. When you
connect Xmod to your computer, audio output from your computer is
channeled to Xmod.
• you have disconnected your earphones from Xmod. This applies only
if you want to hear sound from speakers.
I've adjusted an X-Fi enhancement level, but I only hear a
difference for a few seconds.
The X-Fi enhancement switches are not set to the "On" position. Slide the
switch to the "On" position to enjoy the difference.
I hear audio distortion when using an X-Fi enhancement.
Depending on the type of audio source, distortion may occur when using an
X-Fi enhancement at high levels. Decrease the enhancement level until the
distortion goes away.
Can I hear what I'm recording from the Xmod Line-in jack?
Monitoring of recordings is not available. You can only check your recording
afterwards.