Bluetooth Telephone Operations - Clarion VX400 Owner's Manual & Installation Manual

Bluetooth Telephone Operations

Setting Automatic Connection
The system automatically reconnects the
cellular phone after the connection is lost or
the system is restarted.
• The factory default setting is "Manual".
Touch the [Manual] or [Auto] key of the
Automatic [Connect] item to set the
function preference.
Selecting Microphone
You can select the microphone to be used.
• The factory default setting is "Internal".
Touch the [External] or [Internal] key of the
[MIC Select] item to set the function
Note:
• When "Internal" is selected, and a call
comes in during the operation panel open,
the operation panel is automatically closed
because the microphone is on the operation
panel. (VZ400 only)
• When "Internal" is selected, the
[OPEN /CLOSE] button is disabled
during a call. (VZ400 only)
Setting Microphone Gain
1. You can adjust the input level of the
microphone in 5 levels.
• The factory default setting is "".
Note:
• The input level of the microphone can be
affected by its surroundings. Adjust the level
when the person on the other end of
the telephone has a reception problem.
. Touch the level indicator of the
[MIC Gain] key to adjust the input
level.
Obtaining the Phone Book Data
Sending the Phone Book data from the cellular
phone enables you to make a call using the
Phone Book function from this unit.
1. Perform the Object Push transfer operation
of the Phone Book data on the current
cellular phone.
For details of the operation, see the
operation manual of the cellular phone.
Note:
• Some cellular phones may not be able to
transfer the Phone Book data.
• Some cellular phones cannot transfer
the Phone Book data when the hands-free
mode is set or it is also registered in the
Bluetooth mode. In those cases, disable
6
VX400/VZ400
these functions from the cellular phone
before performing the Object Push transfer.
• Some cellular phones may transfer Phone
Book data automatically.
Telephone operations
Note:
• For your safety, this system disables the
calling functions when the car is moving. Be
sure to stop the car and apply the parking
brake before making a call.
Making a Call Using the Ten-Key Pad
1. Touch the [Keypad] key to display the
Ten-Key pad screen.
. Enter the telephone number by using the
Ten-Key pad displayed on the screen.
. Touch the [Send] key to call the entered
number.
• The following Telephone Interrupt screen is
displayed during phone call.
• Touch the [Audio Transfer] key to talk
using the cellular phone canceling the
hands-free function.
To return to the hands-free mode, touch
the [Audio Transfer] key.
4. When the call is finished, touch the [End]
key to hang up. The display will return
to the previous mode screen selected before
entering the BT Phone mode.
Note:
• Depending on the cellular phone, the
Telephone Interrupt screen may be closed
and the connection with this system may
be disconnected when entering the Private
mode.