2. How to Install
Note:
The TEG-PCBUSR is hot-pluggable, you can connect or disconnect the
TEG-PCBUSR while the computer is on.
For Windows Vista, drivers will install automatically
For Windows ME and 98SE instructions, please refer to the User's Guide.
Windows XP
1. The Found New Hardware
Wizard appears, select No not
this time , and then click Next.
2. Insert the Driver CD-ROM into
your computer's CD-ROM Drive.
3. Select Install the software
automatically (Recommended)
and then click Next.
4. Select the proper driver and then
click Next. If you are using
Windows XP 64-bit, choose the
driver located in d:\winxp64. If you
are using Windows XP 32-bit,
choose the driver located in
d:\winxp.
Note: D:\ represents the drive letter that is assigned to your CD-ROM drive.
.
2
English