Table of Contents
Advertisement
2. Connect a Cat.5, Cat. 5e or Cat.6 RJ-45 network cable from the computer to
an available Ethernet port on the TE100-S16D/TE100-S24D.
3. Move the power switch to the on position.
3. LEDs
POWER
Ÿ Green: Power is on
Ÿ Not Illuminated: Power is off
LINK/ACT
Ÿ Green (Solid): Connection to the port is 100/200Mbps (Half/Full Duplex) or
10/20Mbps (Half/Full Duplex)
Ÿ Green (Blinking): Data transmitting/receiving at 10/20Mbps (Half/Full
Duplex) or 100/200Mbps (Half/Full Duplex)
Ÿ Not Illuminated: Nothing is detected on the port
2
Advertisement
Table of Contents
