Section 5 Cable Specifications - TRENDnet TE100-DX4PCI User Manual

Section 5 Cable Specifications

The Ethernet adapter is equipped with four
RJ-45 connectors, the RJ-45 connector requires a
corrsponding cable. This section describes each
cable's specification.
• Cable for RJ-45 connector for 10Mbps network
Cable type:
twisted pairs
22, 24 or 26 AWG
Category:
Twists per foot:
Nominal impedance:
Maximum cable length: 300'(100m)
Maximum Attenuation: 8 to 10 dB per 100m
at
• Cable for RJ-45 connector for 100Mbps network
Cable type:
twisted pairs of
AWG
Category:
Twists per foot:
Nominal impedance:
Ethernet Card forPCI
3, 4, or 5
2 to 3(min.)
100 ohms
5
2 to 3(min.)
100 ohms
8
UTP with 2
o f
10Mz
UTP with 2
2 6
M20082217500