System Requirements CD-ROM Drive USB Port: 2.0 or 1.1 CPU: 1GHz or above (Windows 7) / 800MHz or above (Windows Vista) / 300MHz or above (Windows XP / 2000) Memory: 1GB RAM or above (Windows 7) / 512MB RAM or above...
2. How to Install Note: 1. Do not insert the TBW-107UB USB adapter until instructed to do so. 2. If you have any Bluetooth driver (software) previously installed on your computer or built-in Bluetooth device, please remove the driver and disable the built-in Bluetooth device first.
Page 5
5. Click Next. 6. Select I accept the terms in the license agreement. Click Next 7. Follow the InstallShield Wizard instructions and then click Finish. 8. Click Yes to restart the computer.
Page 6
9. Connect the TBW-107UB into the computer's USB port. 9. Drivers will install automatically. Your Installation is complete...
3. Configuring the Bluetooth Adapter Note: Make sure your Bluetooth device is powered on and in pairing mode. 1. Double-click the Bluetooth Places icon on your desktop. 2. The TBW-107UB will automatically search for remote devices. If it does not, click Search Devices.
Page 8
Troubleshooting section, User's Guide on the Utility CD-ROM, or TRENDnet's website at http://www.trendnet.com. Register Your Product To ensure the highest level of customer service and support, please take a moment to www.trendnet.com/register register your product Online at:...
3. Make sure to put in the same Passkey on both devices. 4. I am not receiving 3Mbps data rate through the adapter. What should I do? In order to get the full data rate, your Bluetooth device must support Bluetooth V2.0 with Enhanced Data Rate (EDR).