Motorola V8088 Manual page 50

1
Press to add a punctuation character or symbol.
iTAP automatically adds an upper case character: at the beginning of a message; at the
beginning of a sentence; and at the beginning of each word in the phone book.
To insert upper case characters at any other time, press and hold the appropriate key (
9
). See 'Table of Characters'.
iTAP - Adding Numeric Characters
When you press a key, the numeric character assigned to the key appears as one of the
alternative text options. Once you highlight a numeric character, all subsequent characters are
numeric until you press
iTAP - Correcting Text
In iTAP Mode, you can correct the text in the main display area. You can delete one character at
a time or one word at a time.
To move the cursor (
To delete the character before the cursor, press
you require.
To delete the word before the cursor, press and hold
delete the next word, and so on, until you delete all the words.
iTAP - The Dynamic Dictionary
The dynamic dictionary learns the most recent and the most frequent words that you use. This
includes names and acronyms. If there are words that you do not use frequently, then the
dynamic dictionary deletes these first to make room for new words or words that are more
frequently used.
The language you specify for the phone determines the dynamic dictionary that it uses (if there is
one is available). See Language Selection in Phone Setup.
How to Enter Text in Tap Mode
In Tap Mode, each key has a number of different characters assigned to it. See 'Table of
Characters'. When you press the same key several times, you scroll through the assigned
characters.
For example, if you press
you display the
To enter the next character, press the next key that has the character you require. If the next
character is on the same key, you must first press
Correcting Text
In Tap Mode, you can delete one character at a time or you can delete all the text.
To move the cursor (
To delete the character before the cursor, press
you require.
To delete all the text, press and hold
How to Enter Text in Numeric Mode
0
The keys ,
Correcting Text
In Numeric Mode, you can delete one character at a time or you can delete all the text.
To move the cursor (
To delete the character before the cursor, press
46 Using the Options Menu
O
.
< >
), press or
Ú
5
, you display the
K or k character, and so on.
< >
), press or
Ú
C
1 9
to produce numeric characters only.
< >
), press or
Ú
.
C
. You can then insert any new characters
C
. If you continue to press
J j
or character. If you press the same key again,
>
.
.
C
. You can then insert any new characters
.
.
C
. You can then insert any new characters
2
to
C
, you