Table of Contents
Advertisement
Making and Receiving Phone
Switching the Phone On and Off
To switch the phone on or off, press and hold the
will vibrate when it is switched on.
If you switch the phone on and there is no SIM card inserted, you will be asked to insert one.
Once inserted, the phone will check that the SIM card is valid.
A number of messages will then be displayed:
• Enter PIN - a request to enter the SIM card PIN code (if required).
• Enter Phone Unlock Code - a request to enter the phone unlock code (if
required).
• Searching... followed by a network name - as the phone searches and then finds a
suitable network to connect to.
Entering Your SIM Card PIN Code
To enter the PIN code, enter
As you type in each digit of the PIN code a
If you make a mistake, press and release the
C
key down will remove the entire entry.
When the PIN code is complete press the
If the PIN code entered is incorrect, the warning message
followed by
Enter PIN
! If the PIN number is entered incorrectly three times in a row, your phone
will automatically lock-up and the
'Unblocking Your Phone' for details on unblocking your phone.
The PIN code can be changed, see 'Change SIM PIN Code' in the
j
for more details.
Entering Your Unlock Code
If your phone displays the message
unlocking code by entering
The unlock code is a four digit number which is set at manufacture to 1234. The code can be
changed, see 'Change Unlock Code' in the
If you forget your unlock code, press the
O D
option. Enter
AO
.
*
character will be displayed.
C
O
key.
.
Blocked
Enter Phone Unlock Code
BO
.
Phone Setup Menu
$
key. This will display the 'Change Unlock Code'
, enter a new unlock code, and press
S
key. If VibraCall™ is selected, the phone
key to remove the last digit. Holding the
Wrong PIN
will be displayed,
message will be displayed. See
Phone Setup Menu
you must enter your
section for more details.
Making and Receiving Phone Calls
Calls
section
O
.
21
Advertisement
Table of Contents
