Motorola V3 - MANUAL 2 Manual page 45

7UKPI 6CR /QFG
This is the basic text entry mode on your phone.
Tap mode cycles through the letters and number of the key
you press.
If necessary, press # in a text entry screen to switch to
Tap mode. If Tap is not set as the Primary or Secondary entry
mode, see page 41.
6CR /QFG 6GZV 'PVT[ 4WNGU
Press a keypad key repeatedly to cycle through its
characters. For example, you would press 2
one time to enter "a," two times to enter "b," three
times to enter "c," or four times to enter "2."
After 2 seconds, Tap mode accepts the character, and
the cursor moves to the next position.
The first character of every sentence is capitalized. If
necessary, press S down to change the character to
lowercase before the cursor moves to the next
position.
Press S to move the flashing cursor to enter or edit
message text.
If you do not want to save your text or text edits, press
O to exit without saving.