Battery Charging - Motorola V190 Manual

3

battery charging

New batteries are not fully
charged. Plug the battery
charger into your phone and an
electrical outlet. Your phone
might take several seconds to
start charging the battery. Your
display shows Charge Complete
when finished.
Tip: Relax, you can't overcharge your battery. It will perform
best after you fully charge and discharge it a few times.
Your phone has a light just below the external display that can
pulse when you charge your battery. To turn this light on or
off, see page 32.
You can charge your battery by connecting a cable
from your phone's mini-USB port to a USB port on
a computer. Both your phone and the computer
must be turned on, and your computer must have
the correct software drivers installed. Cables and software
drivers are available in Motorola Original data kits, sold
separately.
essentials 9