Connecting Your Phone To Another Device - Motorola V1050 - MANUAL 2 Introduction Manual

3g mobile phone
Hide thumbs Also See for V1050 - MANUAL 2:
Table of Contents

Advertisement

V1050.3G.UG.book Page 37 Tuesday, March 29, 2005 10:39 AM

Connecting Your Phone to Another Device

Press
To
adjust the brightness/contrast
Brightness/Contrast
level of the display. This does not
affect the outgoing video image.
set up camera settings:
Setup
- select
so that the camera
Mirror
captures a "mirror" image (only
applicable in
Internal
- select
Status Icons
icons
in the viewfinder
On/Off
- select
Lighting Conditions
the display: Automatic, Sunny, Cloudy,
Indoor, or
Night
5.7 Connecting Your Phone to Another
Device
You can connect your phone to a computer or
hand-held device using a USB cable.
Note: Not all devices are compatible with all types of
connections. Check your external device for specifications.
The use of wireless devices and their accessories may be
prohibited or restricted in certain areas. Always obey the
laws and regulations on the use of these products.
5.7.1 Setting Up a Cable Connection
Attach a Motorola Original™ USB cable to the phone and
View)
external device as follows.
to turn status
Note: Check your computer or hand-held device to determine
the type of cable you need.
to setup
Action
Plug the end of the
1
cable with the
Motorola logo into
the phone's
accessory connector
port. Make sure that
the logo and the
phone are both facing you.
5.7
Camera
37

Advertisement

Table of Contents
loading

Table of Contents