Using The Wink Self-Timer - Canon IXUS 130 User Manual

Using the Wink Self-Timer

Point the camera at the subject and press the shutter button fully. The
camera will shoot approximately two seconds after it detects a wink.
What if a wink is not detected?
•
Wink a bit slowly.
•
A wink may not be detected if eyes are covered by hair or a hat, or when
wearing glasses.
Changing the number of shots
For the screen in Step 1, press the l button, then press the op buttons to
change the number of shots. Press the l button to accept the setting.
60
Choose .
●
Choose in Steps 1 – 2 on
press the l button.
Press the qr buttons to choose
●
press the l button.
Compose the shot and press the
shutter button halfway.
●
Confirm that a green frame appears
around the face of the person who will
wink.
Press the shutter button fully.
The camera will enter shooting stand-by,
and [Wink to take picture] will appear on
the screen.
Face the camera and wink.
●
The shutter will release approximately 2
seconds after a wink is detected from the
person with a frame around the person's
face.
● To cancel the countdown, press the p
button.
p. 54, then
, then