Sewing Thick Fabric; Sewing Thin Fabric - Brother PC-6500 Operation Manual

Sewing thick fabric

Sewing thin fabric

Sewing a curve with a zigzag stitch
5
Select a short stitch length in order to obtain a fine stitch and
sew slowly while keeping the seam parallel with the fabric edge
as you guide the fabric around the curve.
Note
For sharp corners, temporarily stop sewing while keeping the
needle in the material, raise the presser foot lever, and then
carefully turn the fabric while keeping the fabric edge aligned
with the side of the presser foot. Lower the presser foot lever
and continue sewing.
1. Raise the presser foot lever, and then raise it even higher so
thicker fabrics can be placed under the presser foot.
2. If the fabric does not feed at the beginning of sewing, place
a piece of folded fabric or cardboard under the back of the
presser foot to raise it.
Place thin paper or stabilizer material under the fabric before
5
sewing.
41