Setting Volume Amplify (Mfc-790Cw Only); Automatic Daylight Savings Time - Brother MFC-790CW User Manual

Setting Volume Amplify
(MFC-790CW only)
Please carefully read Choosing the Handset
Volume (For Volume Amplify) (MFC-790CW
only) on page 28.
a
Press MENU.
b
Press a or b to display
General Setup.
c
Press General Setup.
d
Press a or b to display Volume.
e
Press Volume.
f
Press a or b to display
Volume Amplify.
g
Press Volume Amplify.
h
Do one of the following.
If none of the users are hearing-
impaired, press Off, and then press
OK and go to step j.
If some or all of the users are
hearing-impaired, press On.
i
Do one of the following.
If all the users are hearing-impaired,
press Permanent, and then press
OK.
If only some of the users are hearing-
impaired, press Temporary, and
then press OK.
j
Press Stop/Exit.
Automatic Daylight
Savings Time
3
You can set the machine to change
automatically for daylight savings time. It will
reset itself forward one hour in the Spring and
backward one hour in the Fall. Make sure you
have set the correct date and time in the
Date&Time setting.
The factory setting is Off, so you will have to
turn on Automatic Daylight Saving Time as
follows.
a
Press MENU.
b
Press a or b to display
General Setup.
c
Press General Setup.
d
Press a or b to display
Auto Daylight.
e
Press Auto Daylight.
f
Press On (or Off).
g
Press Stop/Exit.
General setup
3
3
29