Overview Of Controls - RCA RTB1013 User Manual

Overview of Controls

ON/OFF Press to turn on your unit, or put your unit in standby
mode. When your unit is in standby mode, power is
still entering your unit. To disconnect power, unplug
the power cord.
OPEN/CLOSE Press to open or close the disc tray.
R(red), When playing a Blu-ray Disc that has a Java application,
G(green), press to control playback. For more information, see the
B(blue), documentation that came with the Blu-ray Disc.
Y(yellow)
Numbers In playback mode, press GOTO button, then press
the number buttons to enter a title, chapter, track,
or time.
CLEAR Press to clear an input.
GOTO Press to search for a title, chapter, track or time.
VOL+/- Press to increase or decrease the volume.
MUTE Press to turn off sound. Press again to turn the sound
back on.
POP UP During Blu-ray Disc playback, press to open a menu that
lets you control Blu-ray Disc playback.
During DVD playback, press to open the DVD title menu
(if available).
SKIP / Press to go to the next or previous chapter (Blu-ray Disc/
DVD) or track (CD).
In tuner mode, press to go to the next higher /lower
preset station.
Navigate through the menus. The left and right arrows
, /TUNE
also tune the radio frequency in the tuner mode.
/TUNE ,
OK Confi rms your selection.
EXIT Press to return to the previous menu.
When in a Menu or fi le browser window, you can press
this button to move you back to a previous menu level
or folder level.
REV Press to fast reverse.
FWD Press to fast forward.
SETUP Press to access the Dimmer (DIM) and Sleep (SLP)
setting (the settings will be shown of the unit's front
panel display).
Dimmer/Sleep Setup
Press this button and use
display window brightness level or the current Sleep
setting, then use
to change the current setting.
STOP Press to stop playback.
PLAY Press to start or resume playback.
STEP/
Press once to pause playback.
Press twice, then each time you press this button, the
picture advances one frame.
LEVEL Toggle channels for diff erent level settings. Adjusts the
value using
INFO Accesses the Info menu.
- 11 -
/ buttons to show the
/ buttons on the remote control
or .