RCA RTB1013 Quick Start Manual

Congratulations on purchasing your new RCA product.
Please read these instructions for quick setup sheet on using the product.
Purple Speaker Terminals Pu
Blue Speaker Terminals
Connect the blue and C o n n e c t t h e p u r p l e a n d C
black wires from Subwoofer bl
black wires from Rear Left
Speaker to the terminals. Sp
Speakers (surround sound)
to the terminals.
Gray Speaker Terminals
Connect the gray and black
w i r e s f r o m R e a r R i g h t
Speakers (surround sound)
to the terminals.
AC Power Cord
Connect the AC power
plug into the AC power
outlet. (See Note 1)
HDM HDMI Out Jack
LAN (Ethernet) Jack LAN (Ethernet) Jack
Use to connect an Ethernet cable (CAT5 Use to connect an Ethernet cable (CAT5 Use to connect Use t
or better with RJ45 connector) to the or better with RJ45 connector) to the
HDMI IN jack on the TV to the HDMI HDM
ETHERNET jack on the back of your ETHERNET j k h b k f
OUT jack on this unit.
player and to an Ethernet jack on a
broadband hub or router.
Hub or Network Router
AUDIO OUT Jacks
Use to connect the AUDIO OUT jacks from the unit to the AUDIO
IN jacks on TV, VCR, Stereo system or other audio component.
REAR VIEW REAR VIEW REAR VIEW
FRONT VIEW FRONT VIEW
PLAY/PAUSE Button
Starts/pauses playback.
Green S Green Speaker Terminals
Red Speaker Terminals Red Sp
Connect Connect the green and black
Connect the red and black Connec
wires fro wires from Center Speaker w i r e s f r o m F r o n t R i g h t w i r e s f
to the te to the terminals.
Speaker Speaker to the terminals.
an HDMI cable from
(See Note 2)
VCR Stereo System
TV
OPEN/CLOSE Button
Opens and closes the disc tray.
ON/STANDBY Button VOLUM VOLUME +/- Buttons
Switches the unit on and off. Adjusts t Adjusts the volume.
White S White Speaker Terminals
C o n n e C o n n e c t t h e w h i t e a n d
black wi black wires from Front Left
Speaker Speaker to the terminals.
Composite Video Out Jack
Use to connect the VIDEO OUT jack on the
back of the unit to the Video IN jack on your
TV so that the video content goes from the
unit to the TV screen.
AUDIO IN Jack
TV Use to connect the AUDIO IN jacks on
the back of the unit to the AUDIO OUT
jacks on TV, VCR, SAT/Cable Box or
others (TV example shown here).
SOURCE Button
Selects the input sources. Press repeatedly
to select between:
• BD/USB – to watch BD/DVD discs, or
photos and video fi les stored on to a data
disc or USB fl ash drive.
• OPTICAL – to select the digital audio
input.
• AUX – to select the analog audio input.
• TUNER – to listen to the FM radio.
USB Port
For connection of USB fl ash drives.
Quick Setup Sheet
RTB1013
Component Video Out Jacks
Use to connect the COMPONENT
VIDEO OUT jacks (Y, P , P ) on
B R
the back of the unit to the com-
ponent video IN jacks on your
TV (shown at right) so that the
video content goes from the unit
to the TV screen.
FM Antenna
FM ANTENNA
Connect the FM antenna to the
FM terminal. (See Note 3)
Optical In Jack
Use to connect the OPTICAL DIGITAL IN jack on the back of
the unit to the OPTICAL OUT jack on TV, VCR, SAT/Cable Box
or other component.
VCR Game Console
TV
IO IN Jack
o connect the AUDIO IN jacks on
ack of the unit to the AUDIO OUT
VCR SAT/Cable Box
No Notes: otes:
1. 1. T h e AC p ow e r p l u g i s
polarized (one blade is
wider than the other) and only fi ts into
AC power outlets one way. If the plug
won't go into the outlet completely,
turn the plug over and try to insert it
the other way.
2. The HDMI output will give you the 2.
highest quality video connection.
3. 3. To receive clear reception, FM an-
tenna must be hooked up.
Specifi cations and external appearance are Spe ec
subject to change without advance notice subj subj j
due due to continuous product improvement.
TV
TV TV