Connecting With Wi-Fi - Motorola PHOTON 4G User Manual

2.
Touch > Settings > Wireless & networks >
Bluetooth settings
3.
Touch
Bluetooth
power is already on, touch
4.
Touch a device to connect.
5.
If necessary, touch
(like ) to connect to the device. When the
0000
device is connected, the Bluetooth indicator
appears in the status bar.
Note: Using a mobile device or accessory while driving may
cause distraction and may be illegal. Always obey the
laws and drive safely.
The Bluetooth Enhanced Audio setting is not
recommended for older Bluetooth headsets, as it may
not deliver acceptable sound quality.
Reconnecting Devices
To automatically reconnect your phone with a
paired device, simply turn on the device.
To manually reconnect your phone with a paired
device, touch the device name in the
list.
devices
68 2H. Wireless and Network Connections
.
to turn on and scan. If Bluetooth
Scan for devices
, or enter the device passkey
OK
.
Bluetooth
Disconnecting Devices
To automatically disconnect your phone from a
paired device, simply turn off the device.
.
To manually disconnect your phone from a paired
device, touch the device name in the devices list,
and then touch
Editing Settings
Touch
Bluetooth settings > Device name
and touch

Connecting With Wi-Fi

To use a Wi-Fi computer network for even faster Internet
access:
Touch
Wi-Fi settings
Note:
Your phone's Wi-Fi features and power levels are not
allowed for outdoor operation in France. To avoid
unlawful interference with radio signals, do not use the
Wi-Fi features in France unless you are indoors.
> Disconnect
> Settings > Wireless & networks >
. Enter a name
.
OK
> Settings > Wireless & networks >
.
.