Table of Contents
Advertisement
When a phone call is received, the caller name, number (see "Receiving caller ID", page 92),
picture/video (see "Storing names and telephone numbers", page 37) may be displayed if you
created a Phone book card corresponding to this caller.
Rejecting a call
When receiving a phone call:
1
Press the [On/Off] key (the call is then forwarded to your mailbox).
Ending a call
1
Press the [On/Off] key.
To stop the ringtone
When receiving a phone call you have the possibility to stop the ringtone.
1
Select
No ring
or press on the [Up] or [Down] side keys.
The idle screen
When switched On, the mobile searches for connection with the network. Once the connection
has been established, a beep sounds and the network and/or service provider name are
displayed together with the time and date, the signal strength and the battery charge level. If
the mobile cannot find a valid network, the signal strength and the operator name are not
displayed.
The icons displayed on the screen can be accessed via the four arrows on the nagivation key.
mail and i-mode indicate that you can directly access the mailer and the i-mode service by
pressing the softkeys.
indicates that your mobile is connected to a GPRS network.
Keypad lock
When activated, the keypad lock feature prevents accidental actions such as calls being made
whilst the phone is being carried in a pocket or a bag. Incoming calls can however be received and
answered. Once the call is over, the keypad lock is automatically reactivated.
To activate the keypad lock from the idle screen:
1
Press and hold the
key.
Keypad locked
To activate the automatic keypad lock from the main menu:
1
Press the [Menu] key. Select Settings.
2
Select Keypad, then select
Keypad
one minute, the keypad lock is automaticaly activated.
To deactivate the keypad lock:
1
Select
Unlock
and press the
key or press and hold the
displayed.
Turning the phone Off
1
Press and hold the [On/Off] key.
A tone sounds to confirm your action and a Goodbye screen is displayed whilst the mobile
switches off. You can set a melody and/or a picture to be played/displayed when the mobile is
switched off (please see "Setting a still or animated image as an Idle screen as a Welcome
screen or as a Goodbye screen from the Pictures folder", page 57 and "Melodies", page 57).
Ensure the phone is switched off before removing battery. Failure to do so may result in loss of data. This will
be indicated by a cross symbol the next time the phone is switched on.
Power saver
When the phone has not been used for more than one minute, the idle screen turns Off
(black screen). Press any key to turn the idle screen On.
However, this does not prevent any operation on your mobile from taking place. You can
therefore receive a call, an SMS, etc. whilst the idle screen is turned Off.
When a PC cable is connected to the mobile, the battery may discharge after a while if the PC is in idle mode.
To ensure your mobile maintains optimum standby and talk time, please do not forget to disconnect the PC
cable after use.
is displayed.
lock. When the phone has not been used for more than
key.
Keypad unlocked
16-
Getting started
GETTING STARTED
Preparing the phone for operation
Please refer to the "Preliminary operations", page 5.
Basic operations
Turning the phone On
1
Press and hold the [On/Off] key. A beep sounds at mobile activation. When switching the mobile
On for the first time or if the phone has been incorrectly switched off
2
If your SIM card is PIN protected,
OK.
3
If prompted, enter the date & time or select
Please refer to "Security features", page 93 for more details on your PIN and lock codes.
If an image is set as a Welcome screen and/or a melody has been set as a Welcome melody,
the mobile first requests the PIN code then shows the selected image and plays the selected melody
before showing the idle screen (please see "Setting a still or animated image as an Idle screen as a
Welcome screen or as a Goodbye screen from the Pictures folder", page 57 and "Melodies", page
57).
Making a call
The phone can make and receive calls only when it is switched on, when a valid SIM card is
inserted and when it is connected to a GSM, DCS or PCS network service.
If the keypad is locked you can receive calls but you cannot make any (see "Keypad lock", page 16)
except emergency calls.
To make a call:
1
Dial the phone number or select one from your Phone book (press the [Down arrow] key
from the idle screen and select one of the available names).
2
Press the [Call/Send] key (
To maintain high audio quality during calls, please note the location of the phone's microphone
(see page 5) and keep this area free of obstruction during use.
Whilst in conversation an Options list (Menu, Speaker On or Speaker Off, AutoDTMF, Hold,
Retrieve, Mute or Unmute, End call and Record) and Sp.on (Speaker On)/Sp.off (Speaker
Off, after the speaker has been set to On) is available by pressing on the [Menu] (indicated by
the
icon).
You can also activate/deactivate the speaker by pressing on the [Right] softkey and set the
phone to Mute/unmute by pressing on the [Left] softkey.
You can set the conversation volume by pressing the [Up] side and [Down] side keys.
In compliance with EU regulations, you are obliged to inform the person you are speaking to
before recording a phone conversation.
1. When using the hands-free mode, do not put the phone to your ear.
2. The option Route to phone or Route to headset may appear if a bluetooth device is connected.
Answering a call
When receiving a phone call ( is displayed):
1
Press the [Call/Send] key.
If a Bluetooth accessory (headset or car kit) is connected to the mobile and you wish to take the call on the
handset, press the Menu key and select Route to phone.
Pressing on the [Up] side or [Down] side keys on an incoming call sets the ringtone volume to Silent.
is
may be displayed.
Enter PIN
is displayed. Enter the PIN code and select
Exit
if the information is correct.
is displayed).
15-
Getting started
Advertisement
Table of Contents
