Table of Contents
Advertisement
Draft messages
The Drafts folder contains the written messages that were not sent. You can edit these messages
and/or send them.
To select one of these messages:
1
Press the [Menu] key. Select Messages.
2
Select SMS.
3
Select
Drafts
and use the [Up arrow] or [Down arrow] keys to scroll to the required message.
4
Press on the [Menu] key to View, Delete,
Move to
SIM,
Numbers & addresses
.
header or text) or
Details
Status request
If a status is requested on a sent message, a status request is sent to the network (must be
network supported). If the status is requested on a delivered message, it can show the date and
time of delivery. The network then answers by sending a status report (SR) back to the phone.
Press OK to acknowledge it.
To activate the status request:
1
Press the [Menu] key. Select Messages.
2
Select SMS.
3
Select Settings.
4
Select
Message config.
5
Select
Delivery report
and select On.
6
Select Save.
To request a reply:
You can request a reply to your message from the person you sent it to. If you activate this
feature, you will be charged for the cost of the reply message.
The availability of this feature is operator dependent.
1
Press the [Menu] key. Select Messages.
2
Select SMS.
3
Select Settings.
4
Select
Message config.
5
Select
Reply requested
and select On.
6
Select Save.
To read the sent message, delete or re-send it when receiving the status:
1
Press on the [Menu] key.
Send again, Clear, Associated message
displayed.
2
Select the required action.
Storage consumption
The storage status for SMS messages can be viewed.
To view the number of messages stored, the total available space on the Phone memory and
on the SIM card:
1
Press the [Menu] key. Select Messages.
2
Select SMS.
Select
Storage
used. The
SMS
3
SIM archive.
Select
Details
for more information on the Phone or SIM stored messages (use [Up arrow]
4
and [Down arrow] keys to scroll to the required information).
Delete
all, Send,
Send as
mail, Edit,
(to store or call the number(s) contained in the SMS
or
Delete message
memory used is displayed. Scroll down to access the
32-
Messages
Broadcast - cell broadcast (CB) messages
These messages are broadcast by the networks to GSM users and may provide general
information about local area dialling codes, weather reports, traffic, news, etc. Each type of
message is numbered, allowing you to select the type of information you wish to receive.
Up to 5 types of messages can be programmed into the selection list.
There are 16 standard message types pre-programmed into the phone. New message types can
be programmed into the selection list using the 3-digit cell broadcast type number. Contact your
service provider for details about the type of messages they broadcast.
Edit a
copy,
Before you activate the broadcast message service, you must enter at least one message type
in the selection list.
Entering a message type in the selection list
1
Press the [Menu] key. Select Messages.
2
Select
3
Select
4
Select
5
Select the message type(s) you wish to receive and select
6
Select
Activating / deactivating the broadcast service
1
Press the [Menu] key. Select Messages.
2
Select
3
Select
4
Select
Reading broadcast messages
Broadcast messages are displayed whilst the phone is on standby. If a broadcast message is received
whilst in conversation or operating the menu, it only becomes visible once the mobile reverts to the idle
screen. A message can contain up to 93 characters and may be displayed on several pages.
Options on message display
Select Clear to clear the CB message displayed. Press the [Call] key to dial the number
contained in the message.
Press on the [Menu] key to display the following menu:
OPTION
Delete
Delete All
Numbers &
addresses
is
Broadcast Off To deactivate cell broadcast.
Activating/deactivating the alert tone
An alert tone can be set to beep every time a new or updated broadcast message is received.
1
Press the [Menu] key. Select Messages.
2
Select
3
Select
4
Select
Broadcast language
All the broadcast messages can be displayed in several languages.
To select a language:
1
Press the [Menu] key. Select Messages.
2
Select
3
Select
4
Select
The availability of this feature is network dependent.
SMS
then Broadcast.
Message types
and select one of the empty types ([...]). Select OK.
Modify by list
(or
Modify by code
if the type number is known).
Save
to store your setting.
SMS
then Broadcast.
Reception
and select
On
or Off.
Save
to store your setting.
ACTION
To delete the current message.
To delete all the received CB messages.
To display all phone numbers contained in the message text and dial or store
them in the Phone book if required.
SMS
then Broadcast.
Reception alert
and select
On
or Off.
Save
to store your setting.
SMS
then Broadcast.
Language
and select one of the available languages.
Save
to store your setting.
33-
Messages
Valid.
Advertisement
Table of Contents
