Cable Connections; Connections Summary; Special Functions; Volume Keys - Motorola M710 Installation Manual

Cable connections

Power
Connect the RED wire to a positive (+) 12V 24V pole for steady power supply.
Ensure the use of a 2A/250V fuse.
Ground
Connect the BLACK wire to a negative pole (-) in the vehicle body.
Ensure the use of a 2A/250V fuse.
Ignition
Connect the GREEN wire to car IGN voltage and check the appropriate voltage
using voltmeter. This connection switches the phone on when turning the ignition
on and it switches the phone off when turning the ignition off.
Ensure the use of a 2A/250V fuse.
Entertainment Mute
Connect the ORANGE wire to the car stereo system entertainment mute connection
to mute the stereo system when receiving or dialing a call.
*Ent. Mute is an optional feature.

Connections summary

Wire color Function Connect to...
RED To supply steady 12V or 24V
(+) power source. steady power.
An additional fuse
is supplied that
must be
connected to the
positive (+) pole.
BLACK To supply steady Vehicle body
(-) power source.
GREEN To switch the IGN voltage
phone on when
the car ignition is
turned on, and off
when the car
ignition is turned
off.
ORANGE To mute the car Car stereo
stereo system system
when receiving or Entertainment
dialing a call. Mute connection
(optional)
WHITE To operate car Car lights/horn
lights/horn to connections
indicate incoming (optional)
call.
Motorola Proprietary
Cable connections (continue)
Entertainment Mute Open Collector connection
M710 unit
Command signal
7
Motorola Proprietary
+12V 24V GND MUTE IGN
Accessories
Ensure...
Hand-Held Microphone
The use of a 2A/250V
fuse.
Mount the Hand-Held Microphone in the vehicle
where it will not disrupt the proper operation of
the car and / or its components. Plug the Hand-
Held Microphone into the hand-held microphone
socket in the control cable.
That the contact point
is only connected to
the vehicle body.
Privacy Handset
The appropriate
voltage using
voltmeter. Ensure the
Mount the privacy handset using the
use of a 2A/250V
plastic base and connect the handset
fuse.
jack to the socket at the end of the
control cable.
That the connection
between the Fixed
Mobile Car Phone
and car stereo system
should be done by an
authorized installer
only. sink shoud be up
to 150mA.
PTT Button
That the connection
between the Fixed Mount the PTT Button in the vehicle where
Mobile Car Phone
it will not disrupt the proper operation of
and the car lights/horn
the car and / or its components. Plug the
should be done by an
authorized installer PTT cable into the PTT socket in the
only. sink shoud be up
control cable.
to 300mA.
10
Data connection/maintenance cable
The Data connection wire in the mini USB connection in M710 enables using the
fixed mobile car phone as a modem or to synchronize data with external computers.
12V
The data connections also enable authorized technicians to maintain the fixed
Relay
Common
mobile car phone for technical service purposes (Software programming).
Normally Normally
Open Close
Connect to orange wire
(for Ent. Mute)
2A Fuses
8
Motorola Proprietary

Special functions

Voice Activation Dialing key (VAD)
The VAD is the blue illuminated key on the top side of the main control unit. This
special button, designed as a mouse key is a multiple operations button which
enables the user to voice activate Name dialing, notice incoming calls, record voice
memos and calls and end or receive phone calls by clicking on the button once.

Volume keys

The volume keys, located on the left hand side of the main control unit enable the
users to adjust audio volume during a call and to adjust the ringer volume during
stand by. While installing the phone in the vehicle don't place the main control unit
close to the car dashboard or to any other component that might interrupt with the
volume keys operation.
Soft keys and shortcuts
Handset Handset
The two soft keys located on the lower part of the phone display enable users to
base base mount customize their phone and set useful menus for their convenience and intuitive
location on their phone display.
The navigation key enables the users to launch pre-defined menus in a very quick
and intuitive way instead of entering the phone menus. The navigation key setup
may vary from model to model.
11
Motorola Proprietary
Mini USB
Connection
Maintenance cable
Motorola Proprietary
Smart key
Soft keys
Volume keys
Navigation key
Motorola Proprietary
Control cable
9
12