Motorola IDEN COMPANIONPRO User Manual page 42

Overview
Table 14: Advanced Phone Settings Tab (Continued)
Field/Button/
Filling in or Clicking...
Drop-down
Specifies the phone's ability to stack Call Alerts. Call Alert
Stacking is a feature that allows phones to receive up to eight
Call Alerts. This field is a lockout flag.
If this field is disabled, the phone will be able to receive up to
Call Alert Stack
eight Call Alerts. If this field is enabled, the phone CANNOT
Timer (min)
receive subsequent Call Alerts if the first alert is still pending
(that is, has not yet been acknowledged). The phone initiating
the subsequent alert will receive the "Target Not Available"
message.
Specifies the ring style that the phone will use for an
Ring Tone incoming interconnect call on that line. Line 1 default is "1";
Line 2 default is "2".
Sounds the failsoft tone at regular intervals (select units only)
if the phone is in Isolated Site Operation (ISO).
ISO Enabled
NOTE: Feature must be provisioned by the service
provider.
Specifies if the failsoft tone will be sounded at regular
Silent Earpiece
intervals if the phone is in Isolated Site Operation (ISO).
Specifies the line (on the phone display) on which the Active
Active Line
Line Indicator (ALI) appears when the phone enters
Indicator
Talkgroup mode.
When Checked, the internal micro-browser of the data
Net mode capable phone is enabled. If unchecked, the browser is
disabled.
Sets the baud rate, that the PC uses to communicate with the
Baud Rate
phone.
Copies the advanced settings to the desired destination iDEN
Copy units. On clicking Copy, the "Copy User's Information"
screen displays.
46
iDEN
GETTING STARTED