Timer Recording Using Videoplus - Daewoo GB14F8T1 Instruction Manual

For timer recordings, clock, date, and stations
must be set correctly (pages 7-9).
Load a cassette with its safety tab in place (see
page 21) and with sufficient free space for the
recording.

Timer recording using VideoPlus+

VIDEOPLUS
NO - - - - - - - - -
INTERVAL
0-9
VIDEOPLUS
VIDEOPLUS
NO 58624 - - - - -
INTERVAL
0-9
VIDEOPLUS
REC EVENT 1
INTERVAL
PDC
DATE
START
END
PR
SPEED
MENU
RECORD TIMER
DATE START END
1 DAILY 16:30 16:46
2 --/--
3 --/--
4 --/--
5 --/--
6 --/--
CLEAR
MENU
You can switch your televideo off.
(Do not use the main power button on the front panel of the set.) The televideo will switch
on and off automatically to record the timer event.
If you do not set the clock, when you press the VideoPlus+ button to set the timer recording,
this set automatically changes to the "TV TIMER" menu.
If you don't have the VideoPlus+ numbers see page 17 for the normal timer.
If you have made a mistake, move back to the relevant position with the
change the setting.
During recording you can switch the screen off pressing
The screen will indicate if the station is not programmed (pages7~9) or if the station has no
VideoPlus+ guide number (pages 24).
Should programmings overlap, you get a warning.
In the case of error messages correct the input or check the date and time on your televideo
(also check your TV guide).
Call the VideoPlus+ menu.
ONCE
From your TV magazine, type in the number next to the
programme you want to record.
DIGIT
INTERVAL
ENTER
EXIT
Select to record
ONCE, DAILY(1x), WEEKLY(2x)
DAILY
Confirm
DIGIT
INTERVAL
ENTER
EXIT
DAILY
OFF
If you want to extend the recording time by 1 minutes
21/01 TUE
16:30
16:35
steps.
02
SP
SELECT
MOVE
EXIT
PR PDC
02 OFF
Press the menu button to confirm.
--:-- --:-- --:-- ---
--:-- --:-- --:-- ---
--:-- --:-- --:-- ---
--:-- --:-- --:-- ---
--:-- --:-- --:-- ---
SELECT
ENTER
CLEAR
EXIT
R E C O R D I N G
c a s s e t t e s
button.
button and
15