Changing Channels; Changing The Volume - Daewoo DTQ 20U4SC Instruction Manual

Changing Channels

1
2

Changing the Volume

1
10 Chapter 3: Operating Your TV
You can change channels in three ways:
1 The WCHV buttons will take you through all memorized channels,
one by one. The WCHV buttons will not access channels that have
not been programmed into the TV's memory. For more information
about programming channels into memory, see the section
3
"Programming your TV's Channel Memory" on the previous page.
2 The number buttons (0-9) will take you to any channel, even if it has
not been memorized. To change to a channel, enter its number; the
TV will tune to the new channel when you enter the second digit of
the channel.
3
The PREVIOUS button will take you instantly to the last channel
you were watching.
1 To change the volume of the TV set, use the CVOLB buttons on
the remote controller or on the front panel.
2
2
To quickly turn off the sound, press the MUTE button on the remote.
The 'MUTE' will appear on screen, colored green. To return the vol-
ume to its previous level, press MUTE again.