Technical Features - Blomberg DWT37200 Use And Care Manual

Possible causes
• The dishes are pre-washed by
hand with a large amount of dish
detergent.
• Rinse aid has accidentally
leaked into the machine.
• The cover of the rinse aid
dispenser is not closed securely.
Possible causes
• Clogged filters.
• Drain hose kinked or clogged.

12. TECHNICAL FEATURES

Load capacity
Permissible water pressure
Electrical connection
Total power
Heater power
Notice :
Because we continually strive to improve our products, we may change our specifications
and design without prior notice.
This device corresponds to the following directives:
UL 749 Household Dishwasher directive.
Foam
How to fix these problems
• Dishes do not need to be pre-washed. Coarse
dirt may be removed with a dishcloth, or you may
hold the dishes under running water.
• If rinse aid has been spilled during refilling,
remove the aid using a paper cloth or sponge.
• Always take care to ensure that the lid is closed
after refilling the rinse aid dispenser.
Water remains inside the machine
after the rinse cycle
How to fix these problems
• Clean all filters as described in this manual.
• Ensure that the drain hose is properly placed and
open.
12 place settings
4.35 - 145 psi (0.3 - 10 bars)
120 V (volts), 12 A (amps), 60Hz (hertz)
1200 W (watts)
1000 W (watts)
27
USA