Table of Contents
Advertisement
N
otebook User Guide
Modem
Lets you specify Enabled or Disabled for activating or inactivating
Modem Device function when system is booting.
LAN
Lets you specify Enabled or Disabled for activating or inactivating LAN
Device function when system is booting.
1394/CARDBUS
Lets you specify Enabled or Disabled for activating or inactivating
1394/CARDBUS Device function when system is booting.
90
Set Supervisor Password
Supervisor password gives you the authority in accessing the setup
utility. You also need to enter this password in system booting and
resuming from suspend mode. When you press <Enter> in this field,
the Set Supervisor Password dialog box appears. Enter a new password
with up to 8 alpha-numeric characters, and then re-enter it for
confirmation.
Set User Password
This field is only available when Supervisor Password has set. Enter the
user password when boot the system or resume from suspend mode.
But if the Write Protect is set in the Fixed disk boot sector field, you
should enter a supervisor password to access the fixed disk when boot
the system or resume from suspend mode.
Password on Boot
If you set this field to Enabled, your computer will ask for the password
each time you boot your computer.
Advertisement
Table of Contents
