LG BD-370 - Blu-Ray Disc Player Owner's Manual page 27

Network blu-ray disc player
Hide thumbs Also See for BD-370 - Blu-Ray Disc Player:
Table of Contents

Advertisement

BD370V-N_BUSALLK-ENG
4/24/09
Rating
Blocks playback of rated disc based on their content. (Not all discs are
rated.)
[Rating 1-8] – Rating one (1) has the most restrictions and rating eight
(8) is the least restrictive.
[Unlock] – If you select unlock, parental control is not active and the
disc plays in full.
BD Age
Set an age limit of BD-ROM play. Use number buttons to input an age limit
for BD-ROM viewing.
[255] – All BD-ROM can be played.
[0-254] – Prohibits play of BD-ROM with corresponding ratings
recorded on them.
Notes:
• The [BD Age] will be applied only for the BD disc that containing the
Advanced Rating Control.
• For the region using MPAA rating level, refer to the table below as an
example.
BD Age
MPAA rating
0
G
8
PG
13
PG-13
17
R
18
NC-17
255
Not restricted
Area Code
Enter the code of the area whose standards were used to rate the DVD
video disc, based on the list on page 49.
1:28 PM
Page 27
[NETWORK] Menu
The [NETWORK] settings are needed to use the software update, BD Live,
Netflix, CinemaNow and YouTube features.
Some BD-ROM discs may enable you to access special BD-ROM sites, if
you connect the player to the Internet. For example, if a BD-ROM site
includes content such as links to future movie trailers, you can watch the
downloaded on-line content on the player.
You do not need to connect to a PC to use this function.
Preparations:
This feature requires an always-on broadband internet connection.
(see page 19-20.)
A BD-ROM disc compatible with this feature is required. Not all
BD-ROM discs are compatible.
IP Mode
If there is a DHCP server on the local area network (LAN), this player will
automatically be allocated an IP address. If you're using a broadband
router or broadband modem that has a DHCP (Dynamic Host
Configuration Protocol) server function, select [Dynamic IP]. The IP
address will automatically be determined.
If there is no DHCP server on the network and you want to set the IP
address manually, select [Static IP] then set the [IP Address], [Subnet
Mask], [Gateway] and [DNS Server] using [IP Setting] option.
27

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents