Resolution Setting - LG BD-370 - Blu-Ray Disc Player Owner's Manual

BD370V-N_BUSALLK-ENG 4/24/09
*3 The [PCM Multi-CH]/[Primary Pass-Thru] setting of the [HDMI] option
and [DTS re-encode] setting of the [SPDIF] option cannot be set
together. If you set the [HDMI] option to [PCM Multi-CH] or
[Primary Pass-Thru], the [SPDIF] option is set to [PCM Stereo] auto-
matically. Also, if you set the [SPDIF] option to [DTS Re-encode] and
the [HDMI] option is set to [PCM Stereo] automatically.
*4 The LPCM audio recorded at 192kHz sampling frequency will be
outputted as stereo sound.
*5 On the PCM audio output, the sampling frequency of SPDIF (DIGITAL
AUDIO OUT) is limited to 96 kHz.
*6 If the [HDMI] or [SPDIF] option is set to [DTS re-encode], the audio
output is limited to 48 kHz and
5.1 ch. If the [HDMI] or [SPDIF] option is set to [DTS re-encode], the
DTS Re-encode audio is outputted for BD-ROM discs, and the original
audio is outputted for the other discs (like [Primary Pass-Thru]).
• If [HDMI] option is set to [PCM Multi-CH] and [SPDIF] option is set to
[Primary Pass-Thru] when the unit plays back Dolby Digital Plus audio,
SPDIF (DIGITAL AUDIO OUT) jack is limited to "PCM 2ch".
• The audio is outputted as PCM 48 kHz/16 bit for MP3/WMA file and
PCM 44.1kHz/16 bit for Audio CD while playback.
• The Dolby TrueHD audio recorded on some Blu-ray discs consists of
Dolby Digital and TrueHD audio. Dolby Digital audio is output through
DIGITAL AUDIO OUT jacks and "DD" displays on the screen if TrueHD
audio is not output (for example, when [HDMI] is set to [PCM Stereo] or
[DTS Re-encode] and [SPDIF] is set to [Primary Pass-Thru])
1:28 PM Page 17

Resolution Setting

The player provides several output resolutions for HDMI OUT and
COMPONENT VIDEO OUT jacks.
You can change the resolution using [Setup] menu or pressing the
RESOLUTION button in stop mode.
Note:
Since several factors affect the resolution of video output, see "Available
resolution according to the resolution setting" on next page.
How to change the resolution using RESOLUTION
button
Press RESOLUTION repeatedly in stop mode to change the resolution.
The display window will show you the current resolution.
How to change the resolution using the [Setup] menu
1
Press HOME and the [Home Menu] appears.
2
Select the [Setup] and press ENTER. The [Setup] menu appears.
3
Use v / V to select [DISPLAY] option then press B to move to the
second level.
4
Use v / V to select the [Resolution] option then press B to move to the
third level.
5
Use v / V to select the desired resolution then press ENTER to confirm
your selection.
17