Table of Contents
Advertisement
Install the Software
Install the software from the CD-ROM that comes with your
Motorola Original data kit. See the data kit's user guide for
more information.
Making a Data or Fax Call
You can connect your phone to a computer or hand-held
device to send data or a fax from the connected device.
Use this feature to transfer data from your computer onto
another device, and to synchronize phonebook and
datebook information between your phone, computer, and/
or hand-held device.
Attach the cable (see "Connecting Your Phone to an
External Device" on page 106) and do the following:
To Establish a Connection
1 Check the phone make sure that the phone is
2 Open the
application on
your computer
3 End the transfer
on your
computer
connected and powered on
place the call through the
application (such as
dial-up-networking)
Note: You cannot dial data or
fax numbers through your
phone's keypad. You must
dial them through your
computer.
close the call and connection
when the transfer is complete
107
Advertisement
Table of Contents
