Dtmf Signalling - Motorola 3200 User Manual

ADVANCED INFORMATION
Short-numbers above 100 (those on your SIM
Card) cannot be used to store sequences
containing pauses.
To make a call with a sequence:
Construct or recall sequence
Digits prior to pause are transmitted.
Await response (dial tone)
Digits prior to next pause are transmitted.
Repeat until all digits have been
transmitted.

DTMF Signalling

DTMF Signalling
DTMF signalling is used, for example, when
you want to use the public paging service.
See also the section "Long Tone DTMF".
DTMF dialling from the keypad:
1. Place the call and wait for the receiving
party to accept data.
2. Enter the digits you want to transmit on
the keypad. Each key press transmits the
digit as a DTMF tone.
Note: Do not use the
DTMF dialling from short-number memory:
1. Place the call and wait for the receiving
party to accept data.
2. Recall the desired short-number.
key
Page 35
2