Locate the five rail buttons on each side of the chassis and locate the five corresponding
holes on each of the inner rail.
Note:
One end of the hole is larger than the other end of the hole.
3
4
Align the larger end of each hole against its corresponding button. Once all aligned, push
the holes toward their corresponding buttons and the rail is placed on the chassis.
Once the rail is placed on the chassis, pull the rail forward until the rail buttons lock in
the small ends of the corresponding holes.
Secure the rail to the chassis with a Type G screw. Repeat the above steps to install other
rail on the chassis.
5
6
G
Chapter Two : Server Installation
13